Mini Shockwave 2M Pistol Brace Kit- FDE

$109.45 - $114.95
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

For those wanting to make their AR15 pistol as compact as possible. Our Mini Milspec Buffer System (based on our Original AR15 CQC system) provides you with a compact buffer system while not affecting reliability while still being able to utilize a Milspec BCG. The shockwave brace is taken down from just over 6" to below 4.75", Mini Buffer Tube is only 5.25" in length from end of the receiver when installed. The Mini Shockwave Brace can collapse completely flush in the last adjustment hole on the buffer tube making the front of the stock flush with the castle nut.

Mini Milspec Buffer Tube with Mini Shockwave Brace Installed, collapsed configuration- 5.125" from back of end plate

Normal Shockwave Brace with 6 position buffer tube- 6.625" from end plate

The Mini Shockwave Brace Buffer System is compatible with 556/223,300 BLK, 762x39, and similar rifle calibers. The weight of these mini buffers and spring rate of the buffer spring mirror the functionality of a traditional carbine buffer weight/ H Buffer weight. Unlike most short buffer tube setups, ours is designed to function with any compatible Milspec bolt carrier group. 

  • Compatible with 5.56/223, 7.62x39, 300 Blackout, and Similar 
  • Proprietary Mini 5 Position Buffer Tube extends only 5.25" from the rear of the receiver. Buffer will accept Milspec parts.
  • MiniMilspec Buffer Tube- Hard coat anodized 7075 Impact Extrusion
  • Flatwire buffer spring for increased reliability and longer life
  • Proprietary mini buffer weighs only 2.5oz- Carbine/ 3.3oz- Heavy and performs like a standard carbine buffer in combination with our flatwire buffer spring
  • Mil-spec end plate
  • Mil-spec castle nut

NOTE- These braces have been "chopped" finish on the shortened portion where stock accepts buffer tube may have blemishes that can be sanded off if desired, this is reflected in the cost.