AR15 Mini Milspec Buffer Tube Kit- Carbine
$59.95 - $69.95
Mini Milspec AR15 Buffer Tube
$34.69
This is a proprietary item designed to work with our mini buffer and our flat wire spring only
We are listing these for people who want to use these for folding receiver extensions to achieve better length of pulls with AK47, Galil, and similar
We take no responsibility for any issues that may occur for mixing and matching buffers or springs that are not designed for this proprietary KAK mini buffer tube, only KAK Industry produced flat wire buffer spring and mini buffer are designed to work with this item
The M4 stock is taken down from just over 6.5" to 5", Mini Buffer Tube is only 5.25" in length from end of the receiver when installed. The Mini Milspec M4 Stock can collapse completely flush in the last adjustment hole on the buffer tube making the front of the stock flush with the castle nut.
Mini Milspec Buffer Tube with Mini M4 Stock Installed, collapsed configuration- 5 5/8” from back of receiver
Normal Milspec M4 stock with 6 position buffer tube- 7 1/8”
Magpul SL-M will collapse flush with castle nut in 2nd adjustment slot, .5" longer than KAK Mini M4 Stock
- Proprietary Mini 5 Position Buffer Tube extends only 5.25" from the rear of the receiver. Buffer will accept Milspec parts and stocks.
- Material- 7075 Impact Extrusion
- Length- 5.75"
- Weight- 3.1 oz
- Finish- Black Military Hard Coat Anodized
- Positions- 5
Uses standard milsepc end plate and castle nut
- Category:
- AR-15 Parts, Stocks & Buffer Tubes
- Tags:
Related Products
-
-
Mini MilSpec/ CQC AR15 Buffer
$8.95 - $14.95 -
Mini Milspec AR15 Buffer Tube Kit with Micro M4 Stock- Carbine
$69.95 - $79.95 -
Reviews
-
Mini buffer tube, HB buffer, and spring.
I got the mini CQC heavy buffer, flat wire spring, and mini CQC receiver extension for my 6.5" .30 HRT SBR for use with the Magpul SL-M stock. I wanted to shorten up the OAL with the mini buffer and SL-M stock and was able to take right at an inch off its length. Function is 100% and totally unchanged from the standard CAR receiver extension, CAR buffer spring, and CAR H buffer that was on it initially. I am very happy with the change and have ordered another set for use on an 8" .338 Spectre.
-
Mini buffer, buffer tube, and flat spring.
I put the mini buffer tube, mini H buffer, and flat wire spring on my SBR 6.5" .30 HRT along with the Magpul MOE SL-M stock, and everything worked perfectly from the get go. I replaced the standard CAR buffer tube/spring/buffer with the Mini but chose the HB for the mini whereas the CAR setup used the standard buffer. I was shooting 190 gr. Hornady SubSonic bullets over my own load going 1050 fps out the 6.5 inch barrel. Function was 100% before and after and of course, accuracy remained unchanged. This Mini setup reduced over all length by a full inch with an OAL of only 23.25 inch, including KX3 flash can. I'm very happy with this setup.
-
Short buffer tube
Perfect for my PDW build
-
Very cool!
Picked up this mini buffer tube, flat wire spring and both the buffers (for weight options). All in all this is an incredibly small package. VERY cool. And the best part, this is cheaper than LWRCI. After seeing KAKs mini M4 offering, I have zero clue as to why anyone would get the double the price LWRCI kit.