K-SPEC 450 Bushmaster /458 SOCOM Enhanced AR15 BCG- Down Vent, Dual Ejectors, Sand Cuts, Nitride
Patent Pending
450 Bushmaster/ 458 SOCOM
For enhanced functionality in adverse and rugged conditions such as sand, mud, dirt, and grime. These rail cuts are designed for debris disbursement, resulting in ultra-high functionality in the toughest conditions, including suppressor fouling and foreign contaminates. Strategically located angle cuts in the rails result in fouling and debris being moved into noncritical areas that are not in contact with the receiver and do not affect the function of the firearm. aka sandcutter
Reduced Peak DB Report
When used in conjunction with a silencer, the gas redirect produces a quieter report
See testing results here- Down Vent vs Side Vent DB reduction testing
Dual ejectors
The K-SPEC dual ejector system uses mil-spec ejectors and springs that require no proprietary parts. Ejector holes are centered on the lugs to avoid any reduction in strength of the bolt. The dual ejector system increases the ejection reliability and adds consistency to the ejection pattern. KAK Industry has been manufacturing dual ejector bolts for the AR10/LR308 platform for over a decade and has used that experience to create a durable and reliable dual ejector system for the AR15 platform.
- Designed to function reliably in the toughest conditions
- Dual Ejectors for enhanced reliability
- Angled Carrier Rail Cuts for flawless function in adverse conditions and prolonged suppressed use aka sandcutter
- Full Auto Profile
- Permatex added between Gas Key and Carrier Mating Surface
- Carrier- 8620 steel, outside rails, bolt runs, and gas bores ground to .0002 tolerances, nitride finish
- Bolt- 9310 steel, outside diameters ground to .0002 tolerances, MPI test, nitride finish
- Firing Pin- 8740 steel, Swiss turned, heat treated, precision ground, chrome plated
- Cam Pin – 4140 steel, Swiss turned, heat treated, nitride finish
- Extractor- 4140 steel, fully machined, Phosphate coated
- Extractor pin- S7 tool steel, ground, heat treated
- Ejector- S7 tool steel, ground, heat treated
- Gas key – 4130 steel, heat treated, secured with T25 torx fasteners, torqued to spec, staked with hydraulic staking machine
- 11.5 oz
- Caliber:
- 450/458
- Finish:
- Nitride
- Hand Preference:
- Right Hand
- Type:
- K-SPEC ENHANCED BCG
- Bolt Material:
- 9310
- Category:
- AR-15 Parts, Bolt Carrier Group